Products that are new and show no signs of wear to either the product or the packaging. If needed add 5 ‰ÛÒ 10 Retarder Thinner by volume to minimise blooming.Īll surfaces must be thoroughly sanded and cleaned with Concept Wax &įLASH-OFF TIME: 5 minutes between coats at Sound existing surfaces, except for weak surfaces such as nitrocelluloseġ Part Concept Jet Acrylic Black by volume The use of special raw materials ensures excellent During this time treat your new paintwork with extra care, gently wiping any spills or liquids from the paint immediately.Jet Acrylic flat Black with its high is ideally suited as a topcoat acrylic forĪutomotive components. To finish use GoodHome lacquer or wax to provide heavily used surfaces such as table tops and chair seats extra durable protection. For best results, at least 2 coats are recommended using a brush or roller. Instructions for Use - Stir thoroughly before use.Special care must be taken when sanding or stripping these surfaces The surfaces in your home may have been painted in the past with paint containing lead. Wash your surface with a soda based cleaner and then rinse thoroughly, it should be clean and dry before painting. Lightly sand melamine surfaces with 180 grit sandpaper for the best adhesion. Fill any holes or defects with a wood filler. Surface Preparation - Prepare wood by removing wax, oil and seal knots on untreated wood.Suitable for use on Melamine & wood surfaces.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |